MECHANICAL INSTALLATION
PRODUCT
PCS6000
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS600000 E40
REV.
G
LANG.
en
PAGE
5. Mechanical installation
5.1. Safety
5.2. Installation planning and execution
– See “Appendix A04 Operation and Interface Documents” for detailed installation
information:
• 01 Control Interface and Operation Description
• 02 Mechanical and Electrical Interface
• 03 Cooling Interface
• 04 Power Cabling Specification
• 05 Communication Link Specification
• 06 Transformer Specification
– Refer to the outline drawing in “Appendix A02, Mechanical Drawings”.
– Refer to the electrical circuit diagram in “Appendix A03, Electrical Drawings”.
– In order to ensure a safe and faultless installation, a careful planning and preparation is
essential.
– Ensure adequate lighting and access to the place of installation.
All installation work must be carried out by qualified personnel according to the
site and equipment requirements and in compliance with local regulations.
NOTICE
Keep dust-free!
Dust inside the PCS6000 can reduce the creepage distances and increase the
thermal stress.
▶ Always unpack the PCS6000 in a clean and dust-free surrounding area.
Furthermore, no dust and dirt producing work may be accomplished in this
area during the installation as long as the doors and cable covers are open.
▶ If construction work is required, always cover the equipment with plastic
sheets to prevent dust from entering the system.
