TRANSPORTATION, STORAGE AND DISPOSAL
PRODUCT
PCS6000
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS600000 E40
REV.
G
LANG.
en
PAGE
4.3.2. Storage and handling of spare parts
Check the spare parts immediately after receipt for possible damages and report any
damage to the forwarder and the insurance company. Follow the instructions below to
maintain the spare parts in good condition and to keep the warranty valid during the
warranty period:
– Keep the spare parts in their original packaging
– Electronic boards have to be stored in antistatic bags or boxes
– The storage place must be:
• Free of vibration and shock
• Protected against dust and sand
• Protected against vermin and insects
• Free of corrosive gases, salt or other impurities that could damage electronic
equipment and boards
• Dry, no condensation
4.4. Disassembly and disposal of equipment
Dispose of the following components according to local regulations:
– Batteries
– Capacitors
– Printed circuit boards
– Electronic components
NOTICE
Electrostatic discharge (ESD) can damage electronic boards
and components!
▶ DO NOT touch printed circuit boards or other sensitive components without
taking static-sensitive handling precautions
▶ DO NOT touch the components without wearing a wrist grounding strap
▶ Put the board or component on a grounded working surface which is protected
against electrostatic discharges
▶ Hold a board only at the edge
▶ Handle a faulty board with care
