TRANSPORTATION, STORAGE AND DISPOSAL
PRODUCT
PCS6000
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS600000 E40
REV.
G
LANG.
en
PAGE
4.2.4. Loading and unloading
The cabinets of the PCS6000 can be lifted and transported by the following:
– Crane (recommended)
– Fork lift truck
Observe the following points when loading and unloading the cabinets:
– Payload of chemicals or cargo with rods poking out is not permitted to be transported
together with the converter components.
– Loading area is to be checked on leakage and cleanliness
– ABB will not accept any liability unless the damage is properly reported. Use damage
description report at the end of the chapter.
– In order to avoid damage to the equipment do not remove the packing before moving
the equipment to the place of installation.
NOTICE
Converter components can be damaged during
transportation!
Metallic dust in particular may cause serious damage and lead to malfunction
when the PCS6000 is powered up.
▶ When moving cabinets, keep the doors closed and ensure that no dirt enters.
▶ Always transport the PCS6000 converter in an upright position and mounted
on the wood pallet.
