TRANSPORTATION, STORAGE AND DISPOSAL
PRODUCT
PCS6000
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS600000 E40
REV.
G
LANG.
en
PAGE
4.
Repeat steps
and
to wrap the cabinet a second time.
4.2.1.5. Securing cabinets to the pallet
The final stage of the packing process is to secure the cabinet to the pallet. Use band
strapping for the large cabinets and polypropylene strapping for BRUs.
Securing a large cabinet to the pallet
1.
Place 2 support beams (1) at least 60 cm in from each end of the cabinet roof and then
slide the main beams (2) over the support beams.
NOTICE
Avoid obstructions when you place the beams. The mains beam must remain
within the pallet footprint (gray).
Figure 4–2 Roof beam placement
2.
Secure the converter cabinet to the pallet by running band strapping through the base
of the pallet and over the beams on the cabinet roof.
3.
Wrap the strapping buckles with bubble wrap and ABB tape.
1) Wooden support beam
(3 cm x 40.5 cm x 0.35 cm)
2) Wooden main beam
(110 cm x 7.5 cm x 5.5 cm)
60 cm
60 cm
2
1
1
2
1
1
