Cabinet Panel Mounting Kit,
OPMP-01
The Control Panel Mounting Platform alows remote
mounting of an ACS-CP-C/A operator Panel on a larger
enclosure or remotely. The kit maintains UL Type 12*
integrity of the mounting location. Adapters, 3 m (10 ft)
cable and mounting hardware are included in this kit.
With this mounting arrangement, the operator panel is
removable identical to a drive-mounted keypad.
Shipping Package Includes:
1. Mounting Template.
2. Panel Platform (Interface board and 2
gaskets installed).
3. Stainless Steel Compression Bracket.
4. Gaskets (for operator panel).
5. Plastic bag with 6 screws.
6. Cat5 Patch Cable 10 ft.
7. Installation Instructions.
8. Panel Connector
8
1. Take Operator Panel and Gaskets (# 4).
2. Turn your Operator Panel face down and separate ring
gasket from middle section.
3. Place the Gasket around the Battery Compartment.
4. Separate square gasket from middle section.
5. Place the Gasket around the Panel Connector.
6. Take the mounting template and make a hole exactly
the same size as the template on the door or wall for
installation of the Panel Mounting Platform.
OPMP-01-Kit Installation Instructions
© 2012
ABB Inc.
All Rights Reserved.
3AUA0000013204 REVD 07/02/2012
* OPMP KIt is Type 12 UL Listed, per UL file E101649, Vol.1
