ABB OmniCore V250XT, Product Manual

Page: 48 / 456

2.8 ABB Ability
The OmniCore™ controller hardware is delivered with a standard mobile connection
(Cellular data connection), or WIFI modem and/or Ethernet connection
1
.
Cellular data connection
If the ABB Ability™ OmniCore™ controller hardware is delivered together with a
standard, free of charge (machine-to-machine or M2M) cellular data connection,
it will automatically establish a connection to the ABB Ability™ digital platform
once the power switch of the ABB Ability™ OmniCore™ controller hardware has
been turned on and has been connected. After the establishment of the connection
there will be a data flow from the OmniCore™ controller hardware to the ABB
Ability™ digital platform.
ABB does not warrant or guarantee an available, stable, uninterrupted, and
interference free connection through the standard cellular data connection. This
is dependent on the availability and quality of the cellular data signal as provided
by the telecommunications carrier on the location where the ABB Ability™
OmniCore™ hardware is installed. The cellular data connection is to be used solely
in connection with the ABB Ability™ OmniCore™ controller hardware and excludes,
without limitation, voice services, web browsing, music downloading and other
services that are not traditionally considered as machine to machine (M2M), but
human-oriented telecommunication services.
ABB has established and maintains a formal information and cybersecurity
procedures which includes commercially reasonable technical and organizational
measures, in order to protect the data against security breaches, accidental or
unlawful destruction, loss, alteration, and unauthorized disclosure of, or access to
the data.
The cellular data connection is not required for the operation of the hardware and
the connectivity settings can be adjusted and turned off at any given time. Detailed
information on the mobile connection is further described in the service description
that can be downloaded from the following web location:
https://share.library.abb.com/api/v4?cid=9AAC910011&dk=Manual
Data
ABB will not acquire any right, title and interest in the data other than the rights
granted by Customer to ABB, but ABB will have the right to collect, store, aggregate,
analyze or otherwise use the data for (i) providing and maintaining the hardware,
services and/or the ABB software to Customer; (ii) prevent-ing, detecting and
repairing problems related to the security and/or the operation of the hardware,
the platform, software; (iii) improving and developing existing services, technologies,
products and/or software and developing new services, technologies, products
and/or software, and all improvements and developments (including all resulting
intellectual property Rights) are exclusively owned by us. In addition, we have the
right to use the data for benchmarking purposes if and to the extent it is anonymized
or non-confidential.
1
For OmniCore E10, only Ethernet connection is available.
Continues on next page
48 Product manual - OmniCore V250XT
3HAC073447-001 Revision: B
© Copyright 2020-2022 ABB. All rights reserved.
2 Controller description
2.8 ABB Ability