ABB OmniCore V250XT Product Manual Download

Page: 41 / 456

2.3 Safety functions and safety related data for OmniCore V250XT

Basic Safety Functions

The OmniCore V250XT provides safety with structure

category 3

with performance

level

according to EN ISO 13849-1. This fulfils the safety performance requirement

as stated in the robot safety standard EN ISO 10218-1.

The safety data is valid for the Basic Safety Functions for applicable ABB
manipulators. The supported manipulators are listed in

Product

specification - OmniCore V line

PFH

[1/hour]

Basic Safety Functions

1.88E0-07

Emergency stop function of the robot initiated by emergency stop
device on the FlexPendant

1.88E0-07

Protective stop function of the robot initiated by three-position en-
abling device on the FlexPendant

1.01E0-07

Mirror emergency stop state of the robot through emergency status
output of the controller

1.88E0-07

Emergency stop function of the robot initiated by external emergency
stop device attached to emergency stop inputs of the controller

1.88E0-07

Protective stop function of the robot initiated by external protective
stop device attached to protective stop inputs of the controller

Extended Safety Functions

The safety data is valid for the Extended safety functions for applicable ABB
manipulators. The supported manipulators are listed in

Product

specification - OmniCore V line

PFH

[1/hour]

Safety Function

1.88E0-07

Muting of emergency stop device on the FlexPendant (detach-
able/swappable FlexPendant), see

Detaching and attaching a Flex-

Pendant on page 80

SafeMove Functions

For configuration of SafeMove functions and supported manipulators, see

Application manual - Functional safety and SafeMove

3HAC066559-001

PFH

[1/hour]

Safety Function

1.88E0-07

Axis position supervision

1.88E0-07

Axis speed supervision

1.88E0-07

Tool position supervision

1.88E0-07

Tool speed supervision

1.88E0-07

Tool orientation supervision

1.88E0-07

Stand still supervision

1.88E0-07

Safe brake ramp supervision

Continues on next page

Product manual - OmniCore V250XT

3HAC073447-001 Revision: B

2 Controller description

2.3 Safety functions and safety related data for OmniCore V250XT

Summary of Contents for OmniCore V250XT








































































































































































































































































































































































































































































Search results

Summary of Contents for OmniCore V250XT

Reviews:

Related manuals for OmniCore V250XT

Brands by name

Popular brands

ABB OmniCore V250XT, Product Manual

Search results

Summary of Contents for OmniCore V250XT

Reviews:

Related manuals for OmniCore V250XT

Brands by name

Popular brands