ABB OmniCore S Series, Operating Manual, Page: 34 / 236

2.2.3 FlexPendant applications
Code
The Code application is used to create new programs, modify existing programs,
view and edit RAPID data, and so on.
Program Pack-
age [3151-1]
Essential App
Package [3120-2]
Limited App
Package [3120-1]
Feature
✓ Create new programs, edit existing
programs
✓ View and edit RAPID modules and
RAPID routines
✓ View and edit RAPID data (program
data)
✓ Debug Options
PP to main, cursor to program
pointer, goto position, call routine,
cancel routine, check program, view
system data, next move instruction
✓ Teach position (ModPos)
✓ Check for syntactic and semantic
error
If the option Program Package is not selected then programs must be created and
edited using RobotStudio.
Jog
The Jog application is used to jog the ABB industrial robot using an intuitive touch
based user interface or using a joystick.
Program Pack-
age [3151-1]
Essential App
Package [3120-2]
Limited App
Package [3120-1]
Feature
✓ ✓ Joystick jog
✓ Touch jog
✓ Align tool
✓ Lead-through
✓ ✓ Jog supervision
✓ GoTo (jog to target)
✓ ✓ 3D visualization
Continues on next page
34 Operating manual - OmniCore
3HAC065036-001 Revision: E
© Copyright 20192020 ABB. All rights reserved.
2 Navigating and handling the FlexPendant
2.2.3 FlexPendant applications