ABB OmniCore C30, Operating Manual, Page: 194 / 236

7.3 Managing Dashboards
Overview
Dashboards are used to display the controller parameters, RAPID data, live values
from I/O signals, and so on.
The values are displayed through dashboards. The dashboards are made up of
cards. Each card displays a value based on its defined properties. A dashboard
can hold a maximum of 6 cards.
Defining cards
Use the following procedure to define a card:
1 On the start screen, tap Operate , and then select Define Cards from the
menu.
2 Tap Create New Card on the context menu.
The Add Card page is displayed.
3 Type or select the values in the title, Label, Value, and Unit fields.
4 Tap Apply .
The new card is created and displayed on the Define Cards page.
Once a card is created you can associate the card to dashboards. For more details,
see
Assigning cards to dashboard on page 195 .
Defining dashboards
Use the following procedure to define a dashboard:
1 On the start screen, tap Operate , and then select Define Dashboards from
the menu.
2 Tap Create New Dashboard on the context menu.
The Add Dashboard page is displayed.
3 Type a name for the new dashboard in the Title field.
4 Tap Apply .
The new dashboard is created and displayed in the Define Dashboards and
Dashboards page.
Continues on next page
194 Operating manual - OmniCore
3HAC065036-001 Revision: E
© Copyright 20192020 ABB. All rights reserved.
7 Running in production
7.3 Managing Dashboards