ABB NETA-21, User Manual

Page: 109 / 196

Networks 109
FTP/FTPS
With the NETA-21 you can access the content of the SD memory card remotely if you use
the FTP protocol either through an encrypted or an unencrypted channel.
Go to Settings –> Network services to enable FTP. You can enable either the encrypted
(FTPS) or unencrypted (FTP) connection. FTPS is enabled by default.
You have to create an FTP user account to be able to log on to the FTP connection.
You must have an FTP client to be able to connect to the NETA-21. The following
screenshots are taken from WinSCP, but you can have another client, too.
When you configure the FTP connection, you have to specify the protocol, the URL (or IP
address) of the NETA-21 and the username and password of the FTP account.
If you choose the FTP protocol with No encryption, the default port number is 21. If you
choose the FTP protocol with TLS Explicit encryption, the default port number is 990. You
can customize the ports under
Network services .
When you have logged on to the FTP connection, the you see two panes listing the files on
a local computer and the content of the SD memory card.
You can move files from one pane to another with the drag and drop feature.