ABB MultiMove Applications Manual Download

Page: 53 / 110

5 User interface specific for MultiMove

5.5. Mechanical unit menu

3HAC021272-001 Revision: H

ght

200

4-2008 ABB.

5.5. Mechanical unit menu

The graphical display

In the QuickSet menu, tap the Mechanical unit menu button. All mechanical units will be

shown.

en0400000789

The selected mechanical unit is highlighted with a frame around it.

Any mechanical unit that is coordinated with the selected unit will be indicated with a

flashing frame and the text Coord.

Jogging coordinated or uncoordinated

Jogging a mechanical unit will automatically move all units that are coordinated with it.

In the example above, jogging STN_1 will move ROB_1 and ROB_2 as well, since they are

coordinated with STN_1 (the work object wobj_stn1 is moved by STN_1). To be able to jog

STN_1 without moving the robots, change the coordinate system for the robots to world

coordinates or change the work object for the robots to wobj0. For more information about

work objects being coordinated with a mechanical unit, see

Coordinated work objects on

page 59

Summary of Contents for MultiMove





































































































Search results

Summary of Contents for MultiMove

Reviews:

Related manuals for MultiMove

Brands by name

Popular brands

ABB MultiMove, Applications Manual

Search results

Summary of Contents for MultiMove

Reviews:

Related manuals for MultiMove

Brands by name

Popular brands