ABB Johnson Controls AYK550-UH, User Manual

Page: 210 / 348

1-210 A
<.
550-UH User’s Manual
Embedded fieldbus
1.
RATED SPEED
is a percent of maximum frequency (parameter 2008) if the drive is in scalar mode,
and is a percent of maximum speed (parameter 2002) in speed mode.
N2 binary input objects
The following table lists the N2 Binary Input objects defined for the A
YK
550 drive.
AI9 MEGAWATT HOURS 0141 1 MWh 0…65535
AI10 RUN TIME 0114 1 H 0…65535
AI11 DC BUS VOLTAGE 0107 1 V 0…999
AI12 OUTPUT VOLTAGE 0109 1 V 0…999
AI13 PRC PID FEEDBACK 0130 10 % 0…100
AI14 PRC PID DEVIATION 0132 10 % 0…100
AI15 EXT PID FEEDBACK 0131 10 % 0…100
AI16 EXT PID DEVIATION 0133 10 % 0…100
AI17 LAST FAULT 0401 1 fault code
AI18 PREV FAULT 0402 1 fault code
AI19 OLDEST FAULT 0403 1 fault code
AI20 AI 1 ACTUAL 0120 10 % 0…100
AI21 AI 2 ACTUAL 0121 10 % 0…100
AI22 AO 1 ACTUAL 0124 10 mA 0…20
AI23 AO 2 ACTUAL 0125 10 mA 0…20
AI24 MOTOR TEMP 0145 1
°
C 0…200
AI25 REVOLUTION CNT 0142 1 MREV 0…32767
N2 Binary Inputs:
Number Object Drive Parameter Range
BI1 STOP/RUN Status Word 0 = Stop, 1 = Drive Running
BI2 FORWARD/REVERSE Status Word 0 = Forward, 1 = Reverse
BI3 FAULT STATUS Status Word 0 = OK, 1 = Drive Fault
BI4 RELAY 1 STATUS 0122 (bit mask 04) 0 = Off, 1 = On
BI5 RELAY 2 STATUS 0122 (bit mask 02) 0 = Off, 1 = On
BI6 RELAY 3 STATUS 0122 (bit mask 01) 0 = Off, 1 = On
BI7 RELAY 4 STATUS 0123 (bit mask 04) 0 = Off, 1 = On
BI8 RELAY 5 STATUS 0123 (bit mask 02) 0 = Off, 1 = On
BI9 RELAY 6 STATUS 0123 (bit mask 01) 0 = Off, 1 = On
BI10 INPUT 1 STATUS 0118 (bit mask 04) 0 = Off, 1 = On
BI11 INPUT 2 STATUS 0118 (bit mask 02) 0 = Off, 1 = On
BI12 INPUT 3 STATUS 0118 (bit mask 01) 0 = Off, 1 = On
BI13 INPUT 4 STATUS 0119 (bit mask 04) 0 = Off, 1 = On
BI14 INPUT 5 STATUS 0119 (bit mask 02) 0 = Off, 1 = On
N2 Analog Inputs:
Number Object
Drive
Parameter
Scale
Factor
Units Range