ABB IRT 710, Product Manual

Page: 186 / 384

4.3.2 Inspecting the lubrication system
Overview
If the track motion is equipped with an automatic lubrication system the level of
the lubricant should be checked according to the maintenance schedule (see
Maintenance schedule on page 181 ), even if the system should apply the lubricant
equally over a longer period. The timer is only active when the system is in Auto
mode.
Location of lubrication system
The lubrication system is located as shown in the figure.
xx2200000633
Required equipment
Note Art. no. Equipment, etc.
These procedures include
references to the tools re-
quired. Other tools and procedures
may be required. See refer-
ences to these procedures in
the step-by-step instructions
below.
Continues on next page
186 Product manual - IRT 710
3HKA00000186299-001 Revision: B
© Copyright 2023 ABB. All rights reserved.
4 Maintenance
4.3.2 Inspecting the lubrication system