ABB IRC5 with FlexPendant Operating Manual Download Page 98

Page: 98 / 306

3.6.7 Logging on and off

Logout procedure

Use this procedure to log off the system.

Action

On the

ABB

menu, tap

Log Off

Tap

Yes

to confirm.

Login procedure

Use this procedure to log on to the controller, using the User Authorization System,
UAS. UAS can limit the available functions for users.

After a log off, the Login window is displayed automatically.

en0400000947

Information

Action

If you select

Default User

, then no pass-

word is required, and you are logged on
automatically.

Tap on the

User

menu and select a user.

If there are more than seven users then
the menu is replaced with a button.

If the user you have chosen has a pass-
word you must use the soft keyboard to
enter password. Tap

ABC...

to display the

soft keyboard.

Enter the password and tap

Tap

Login

Continues on next page

Operating manual - IRC5 with FlexPendant

3HAC050941-001 Revision: G

3 Navigating and handling FlexPendant

3.6.7 Logging on and off

Summary of Contents for IRC5 with FlexPendant


















































































































































































































































































































Search results

Summary of Contents for IRC5 with FlexPendant

Reviews:

Brands by name

Popular brands

ABB IRC5 with FlexPendant, Operating Manual

Search results

Summary of Contents for IRC5 with FlexPendant

Reviews:

Brands by name

Popular brands