Chapter 8. Getting Robot Files from Forge/OS
In this section, you begin adding the robot in Forge/O and you copy configuration files to a UOB drive.
1. In the
Admin
role, open the
Device Configuration
app.
2. Tap
New +
to open the Device Library.
3. Find the
ABB industrial robot
option in the Device Library. You can use the
Filter by
dropdown to show only
robots on the list.
4. Oelect
ABB industrial robot
and tap
NEXT
to continue with configuration.
5. Oelect the controller model, then select the robot model. You can fill in the other information later.
