ABB IRC5 Compact, Applications Manual

Page: 79 / 88

C Using PROFINET Configurator Express
Creating controller network configuration file using PROFINET Configurator Express
Description
The following example is performed using PROFINET Configurator Express .
This example demonstrates how to create a PROFINET configuration file for one
device, a Siemens ET200S with 5 DO 2-bit modules and 1 DI 2-bit module.
Action
Start PROFINET-IO Configurator Express. 1
In PROFINET-IO Configurator Express, click File and select New to create a new
empty project.
2
Click File and select Save to save the new project. Use the name "TestProject". 3
In the Bus Structure window, make sure that the "TestProject" node is selected. 4
In the Device Details window, set the PROFINET IP range for this project by setting
the following parameters:
• Last IP Address: 192.168.5.254
• First IP Address: 192.168.5.2
• Subnetmask: 255.255.255.0
en1100000063
5
In the Device Catalog window, expand the nodes Phoenix Contact Software GmbH ,
Generic PN and PLC .
• Select the PLC version that corresponds to the current version of the Phoenix
Contact Software . Currently, it is 3.9 version.
xx1400002205
6
Continues on next page
Application manual - PROFINET Controller/Device 79
3HAC050969-001 Revision: G
© Copyright 2015-2018 ABB. All rights reserved.
C Using PROFINET Configurator Express