ABB IRBP, Product Manual

Page: 312 / 334

10.5 Standard tools IRBP
General
All service (repairs, maintenance and installation) procedures contain lists of tools
required to perform the specified activity.
All special tools required are listed directly in the procedures while all the tools
that are considered standard are gathered in the Standard toolkit and defined in
the table below.
This way, the tools required are the sum of the Standard toolkit and any tools listed
in the instructions.
Contents, standard toolkit
Rem. Tool Qty
Ring-open-end spanner 8-19 mm 1
Socket head cap 5-17 mm 1
Torx socket no: 20-60 1
Box spanner set 1
Torque wrench 75-400 Nm 1
Torque wrench 500-1500 Nm 1
Ratchet head for torque wrench 1/2 1
Hexagon-headed screw M10x100 2
Socket head cap no: 14, socket 40 mm bit L 100 mm 1
To be shortened to 12 mm Socket head cap no: 14, socket 40 mm bit L 20 mm 1
Socket head cap no: 6, socket 40 mm bit L 145 mm 1
Socket head cap no: 6, socket 40 mm bit L 220 mm 1
312 Product manual - IRBP /D2009
3HAC037731-001 Revision: T
© Copyright 2010-2020 ABB. All rights reserved.
10 Reference information
10.5 Standard tools IRBP