ABB IRB 6700 Series, Product Manual

Page: 813 / 846

6 Decommissioning
6.1 Environmental information
Symbol
The following symbol indicates that the product must not be disposed of as common
garbage. Handle each product according to local regulations for the respective
content (see table below).
xx1800000058
Hazardous material
The table specifies some of the materials in the product and their respective use
throughout the product.
Dispose components properly according to local regulations to prevent health or
environmental hazards.
Example application Material
Serial measurement board Batteries, NiCad or Lithium
Cables, motors Copper
Base, lower arm, upper arm Cast iron/nodular iron
Gears, screws, base frame, and so on. Steel
Brakes, motors Neodymium
Cables, connectors, drive belts, and so on. Plastic/rubber
Gearboxes Oil, grease
Covers, synchronization brackets Aluminium
Turning disc (foundry) Nickel
Oil and grease
Where possible, arrange for oil and grease to be recycled. Dispose of via an
authorized person/contractor in accordance with local regulations. Do not dispose
of oil and grease near lakes, ponds, ditches, down drains, or onto soil. Incineration
must be carried out under controlled conditions in accordance with local regulations.
Continues on next page
Product manual - IRB 6700 813
3HAC044266-001 Revision: N
© Copyright 2013 - 2018 ABB. All rights reserved.
6 Decommissioning
6.1 Environmental information