ABB IRB 5710, Product Manual

Page: 506 / 610

5.9.3 Replacing the axis-3 gearbox
Keeping the cabling installed during gearbox replacement
For floor-mounted manipulators the cable harness and DressPack cable package
(if installed) can be kept installed on the robot, if there is enough free space on the
floor to put down the upper arm next to the manipulator. There should be enough
space to place two pallets in a row.
For inverted manipulators, the cable harness and DressPack cable package must
be removed from the upper arm.
Location of the gearbox
The gearbox is located as shown in the figure.
xx2100000484
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the IRB 5720 via myABB Business Portal,
www.abb.com/myABB .
Continues on next page
506 Product manual - IRB 5720
3HAC079195-001 Revision: A
© Copyright 2022 ABB. All rights reserved.
5 Repair
5.9.3 Replacing the axis-3 gearbox