ABB IRB 460 Series, Product Manual, Page: 193 / 398

Note Art.no. Equipment, etc.
VK 65x8 (2 pcs) Spare parts on page 389 VK cover
D=70/85 T=8 (2 pcs) 3HAB3701-19 Sealing ring
3HAA2103-13 Taper roller bearing
Used for mounting outer
bearing races. 3HAC040028-001 Press tool, premounting outer
race bearing
Used for assembly and disas-
sembly. 3HAC040029-001 Press tool, replacing shaft
Used for disassembly of
shaft. 3HAC040035-001 Auxiliary shaft
3HAC040025-001 KM7 socket
3HAB3537-1 Grease
Dinitrol 490 Rust preventive
Loctite 243 3HAB7116-1 Locking liquid
Content is defined in section
Standard tools on page 383 .
- Standard toolkit
These procedures include
references to the tools re-
quired. Other tools and procedures
may be required. See refer-
ences to these procedures in
the step-by-step instructions
below.
Press tool pre-mounting outer race bearings
The press tool used for pre-mounting the outer bearing races in the tilthouse,
consists of the parts shown in the figure. For art. no. see
Required equipment on
page 192 .
A B C D E F G H A
xx1100000250
A Thread washer (2 pcs)
B Support washer (3HAC040029-001)
C Upper arm
D Outer race bearing
Continues on next page
Product manual - IRB 460 193
3HAC039842-001 Revision: P
© Copyright 2012-2018 ABB. All rights reserved.
4 Repair
4.4.2 Replacing the tilthouse unit
Continued