ABB IRB 2600 Series, Product Manual, Page: 290 / 454

Required equipment
Note Article number Equipment
Lengths: 2 m (1 pcs), 1.5 m (1
pcs) - Roundslings
Lifting capacity: 1,000 kg.
3 pcs 3HAC15535-1 Support legs
Valid for IRB 2600-20/1.65, IRB
2600-12/1.65, IRB 2600-12/1.85,
IRB 2600ID-15/1.85, IRB 2600ID-
8/2.0
.
3HAC15520-2 Guide pin, M8x150
Always use guide pins in pairs.
Valid for IRB 2600 Type C-
20/1.65, IRB 2600 Type C-
12/1.65. 3HAC13056-2 Guide pin, M12x150
Always use guide pins in pairs.
Valid for IRB 2600-20/1.65, IRB
2600-12/1.65, IRB 2600-12/1.85,
IRB 2600ID-15/1.85, IRB 2600ID-
8/2.0
.
- Lifting eye
M8
3 pcs
Valid for IRB 2600 Type C-
20/1.65, IRB 2600 Type C-
12/1.65
.
- Lifting eye
M12
3 pcs
Content is defined in section
Standard tools on page 441 .
Standard toolkit
These procedures include refer-
ences to the tools required. Other tools and procedures may
be required. See references to
these procedures in the step-by-
step instructions below.
Included with spare part base. 3
pcs 3HAC065190-001 Gasket
Loctite 7063 - Cleaning agent
For cleaning.
Loctite 574 12340011-116 Flange sealant
For sealing. Only valid for IRB 2600-20/1.65,
IRB 2600-12/1.65, IRB 2600-
12/1.85, IRB 2600ID-15/1.85, IRB
2600ID-8/2.0.
Continues on next page
290 Product manual - IRB 2600
3HAC035504-001 Revision: Q
© Copyright 2009-2018 ABB. All rights reserved.
4 Repair
4.6.2 Replacing the base
Continued