ABB IRB 1010, Product Manual, Page: 314 / 334

8.2 Environmental information
Introduction
ABB robots contain components in different materials. During decommissioning,
all materials should be dismantled, recycled, or reused responsibly, according to
the relevant laws and industrial standards. Robots or parts that can be reused or
upcycled helps to reduce the usage of natural resources.
Symbol
The following symbol indicates that the product must not be disposed of as common
garbage. Handle each product according to local regulations for the respective
content (see table below).
xx1800000058
Materials used in the product
The table specifies some of the materials in the product and their respective use
throughout the product.
Dispose components properly according to local regulations to prevent health or
environmental hazards.
Example application Material
Manipulator body castings, etc. Aluminium
Serial measurement board Batteries, Lithium
Calibration pins, cables, etc. Copper
Serial measurement board Lead
Gearboxes, process hub, cable harness, etc. Oil, grease
Cable protectors, etc. Plastic/rubber
Mechanical stop screws, etc. Stainless steel
Mechanical stop screws, etc. Steel
Continues on next page
314 Product manual - IRB 1010
3HAC081964-001 Revision: B
© Copyright 2022 ABB. All rights reserved.
8 Decommissioning
8.2 Environmental information