ABB i-bus VC/S 4 1 Series, Product Manual, Page: 58 / 199

ABB i-bus® KNX PARAMETERS
CAUTION
To ensure that the device functions properly, a reset must be performed each time the assignment of
the outputs is changed.
Note
The possible options and the standard option depend on the selection made in the parameter Basic-
stage heating [controller] .
Option
Internal channel output (valve)
The control value is output on the internal channel output. In addition, the control value is output via
one of the following group objects:
•
Status Control value basic-stage heating
(DPT 1.001)
• Status Control value basic-stage heating (DPT 5.001)
Group object The control value is output via one of the following group objects:
•
Status Control value basic-stage heating (DPT 1.001)
• Status Control value basic-stage heating (DPT 5.001)
Prerequisites for visibility
• Parameter window
Channel X
\ Parameter window
Application parameters
– Parameter
Channel function
\ Option
Controller channel
– Parameter
Basic-stage heating [controller]
\ all options except
Deactivated
• The parameter is in the parameter window
Channel X
\ parameter window
Application parameters
.
or
• Parameter window Channel X \ Parameter window Application parameters
– Parameter Channel function \ Option Actuator channel
– Parameter Basic-stage heating [actuator] \ Option Activated
• The parameter is in the parameter window Channel X \ parameter window Application parameters .
7.4.8 Activate basic-stage cooling via
This parameter is used to define whether the control value for activating basic-stage cooling is output
via an internal output or a group object.
Product manual | EN-US | VC/S 4.x.1 | 2CDC508220D0211 Rev. B 58
Note about navigation in the PDF: Key combination 'Alt + left arrow'
jumps to the previous view/page