ABB i-bus VC/S 4 1 Series, Product Manual, Page: 131 / 199

ABB i-bus® KNX PARAMETERS
7.4.134 Monitor receipt of group object "Operating mode normal (master)"
This parameter is used to define whether the monitoring of group object
Operating mode normal (mas-
ter) is activated.
Note
If no value is received on group object Operating mode normal (master) during the set time interval (→
parameter Time interval for cyclical monitoring ), the following actions are carried out:
• Group object Error "Operating mode" receipt is set to "Error"
• Value in the parameter
Operating mode after exceeding monitoring time
becomes valid
Option
Deactivated Monitoring is deactivated.
Activated Monitoring is activated.
The following dependent parameters are shown:
•
Time interval for cyclical monitoring
•
Operating mode after exceeding monitoring time
Prerequisites for visibility
• Parameter window Channel X \ Parameter window Application parameters \ Parameter Channel
function \ Option Controller channel
• Parameter window Channel X \ Parameter window Monitoring and safety \ Parameter Cyclical
monitoring
\ Option
Activated
• The parameter is in the parameter window Channel X \ parameter window Monitoring and safety .
7.4.135 Monitor receipt of group object "Window contact"
This parameter is used to define whether the monitoring of group object Window contact (master/
slave) is activated.
Note
If no value is received on group object Window contact (master/slave) during the set time interval (→
parameter
Time interval for cyclical monitoring
), the following actions are carried out:
• Group object
Error "Window contact" receipt
is set to "Error"
• Until a new value is received on group object Window contact (master/slave) , the controller is in
Building Protection operating mode
Option
Deactivated Monitoring is deactivated.
Activated
Monitoring is activated.
The following dependent parameters are shown:
•
Time interval for cyclical monitoring
The following dependent group objects are displayed:
•
Error "Window contact" receipt
Prerequisites for visibility
• Parameter window Channel X \ Parameter window Application parameters
– Parameter Channel function \ Option Controller channel
– Parameter Window status receipt \ Option Via group object
• Parameter window Channel X \ Parameter window Monitoring and safety \ Parameter Cyclical
monitoring \ Option Activated
• The parameter is in the parameter window Channel X \ parameter window Monitoring and safety .
Product manual | EN-US | VC/S 4.x.1 | 2CDC508220D0211 Rev. B 131
Note about navigation in the PDF: Key combination 'Alt + left arrow'
jumps to the previous view/page