ABB i-bus
®
KNX
Parameters
FCC/S 1.X.X.1 | 2CDC 508 200 D0211 Rev A 115
7.4.1.1.1.2.1
—
Dependent Parameter
Basic-stage heating
The following description applies in the case that the
Actuator device
option has been selected in
the
Device function
parameter.
Options:
Deactivated
Fan coil unit: Water heating coil
This parameter is used to select whether the device is to be used for a heating application.
•
Deactivated
: If this option is selected, the
Heating
function is deactivated and the
Heating
control value
group object hidden. All dependent parameters and parameter windows are also
deactivated.
•
Fan coil unit: Water heating coil
: This option should be selected if the device is used to actuate
a heating stage. The dependent parameters and the dependent
Heating control value
group ob-
ject are enabled.
Dependent parameters:
•
Type of heating/cooling system
•
Heating/Cooling changeover
•
Use 6-way valve (only FCC/S 1.2.x.1 / 1.3.x.1)
•
Actuate basic-stage heating via
Note
On the selection of the
Fan coil unit: electric heater or Fan coil unit: Water heating coil
options,
the fan follows the valve control value for this stage if the automatic mode is active.
On the selection of the
Free configuration
option, this can also be set via a parameter.
7.4.1.1.1.2.2
—
Dependent Parameter
Basic-stage cooling
The following description applies in the case that the
Actuator device
option has been selected in
the
Device function
parameter.
Options:
Deactivated
Fan coil unit: Water cooling coil
This parameter is used to select whether the device is to be used for a cooling application.
•
Deactivated
: If this option is selected, the
Cooling
function is deactivated and the
Cooling
control value
group object hidden. All dependent parameters and parameter windows are also
deactivated.
•
Fan coil unit: Water cooling coil
: This option should be selected if the device is used to actuate
a heating stage. The dependent parameters and the dependent
Cooling control value
group ob-
ject are enabled.
