Procedure
1. Install the front border cover (A):
a. Align the cover bolts with the holes
in the bottom part of the cabinet.
b. Install the nuts and wahers (C).
c. Tighten the nuts.
2. Install the rear cover (B):
a. Install the cover.
b. Install the bolts (D).
c. Tighten the bolts.
18.5
Remove the plate and the covers
Preliminary requirements
•
Screwdriver, cross
Procedure
1. Remove the fasteners (A).
2. Remove the plate (B).
3. Remove the covers from the terminals
(C).
18.6
Install the plate and the covers
Preliminary requirements
•
Screwdriver, croess
•
Three fasteners M5
B D
A
C
C
B
A
Access to parts
82
6AGA000007-0611-EN | 001
