Operation Manual / TPS44-H.. - TPS52-H..
10 Dismantling and fitting / 10.18 Installing air inlets
© Copyright 2021 ABB. All rights reserved.
HZTL4037_EN
Rev.G
June 2021
10.18
Installing air inlets
Fig. 46: Installing the air inlets
Product
Size
Tightening torque [Nm]
TPS44
M10
30 Nm
TPS48
M10
30 Nm
TPS52
M10
30 Nm
Table 42: Tightening torque (72020)
1. Fit the new O-ring (81010 / 82010) to the filter silencer (81000) or the air suction
branch (82000).
2. Manually position the filter silencer (81000) or the air suction branch (82000) on the com-
pressor casing (72000).
3. Fit the V-clamp (72020).
4. Align the casing position of the filter silencer (81000) or the air suction branch (82000) to
the marking.
5. Tighten the V-clamp (72020).
Page
91
/
109
