Operation Manual / A150-M56/66/57/67 - A155-M..
10 Dismantling and fitting with removed air inlet and gas outlet / 10.6
Removing the cartridge group
© Copyright 2021 ABB. All rights reserved.
HZTL4032_EN
Rev.Q
January 2021
10.6
Removing the cartridge group
u
Mark the casing position for assembly.
Fig. 59: Removing cartridge group 1
Product
Position
Tightening torque [Nm]
A150
01
150
A155
01
150
Table 44: Tightening torque (90012-01)
1. Treat threads of studs (51006) with penetrating oil and leave to take effect.
2. Loosen nuts (51007) and remove Verbus Ripp® washers (51003) together with the fasten-
ing strips (51002).
3. Fit the cross-piece of the service support (90012). Observe the tightening torque.
Page
107
/
194
Summary of Contents for HT604364
Page 2: ......