Operation Manual / TPS44-H.. - TPS52-H..
3 Removing and Installing / 3.1 Turbocharger weight and transporta-
tion
© Copyright 2021 ABB. All rights reserved.
HZTL4037_EN
Rev.F
May 2021
3
Removing and Installing
3.1
Turbocharger weight and transportation
Lifting gear with a sufficient load limit must be used for removing, installing and transport-
ing the turbocharger. The weight specified below applies to the heaviest variant possible.
Depending on the specification, the weight specified on the rating plate may be lower than
the standard value specified here.
Produkt
Gewicht Turbolader komplett [kg]
TPS44
120
TPS48
180
TPS52
250
Table 4: Gesamtgewicht
3.1.1
Swivel lifting eyes to be used
One swivel lifting eye (S) is required to safely lift this turbocharger. This is not included in
the ABB scope of delivery.
Fig. 10: Swivel lifting eyes
Product
Thread M
Length H
[mm]
Diameter D
[mm]
Minimum load limit
[kg]
TPS44
M8
≤
12
≤
25
300
TPS48
M8
≤
12
≤
25
300
TPS52
M10
≤
15
≤
25
400
Table 5: Swivel lifting eyes to be used
Page
28
/
111
