Operation Manual / 4 Product description / A130-H.. - A140-H
5 Operation and service / 5.4 Stopping the engine
© Copyright 2018 ABB. All rights reserved.
HZTL4030_EN
Revision E
September 2018
5.4
Stopping the engine
CAUTION
Residual heat in the turbocharger
If the residual heat in the turbocharger is not adequately dissipated, it may
damage the engine.
u
Adequate cooling of the turbocharger must be ensured after stopping
the engine.
Water-cooled turbocharger variant
u
Post-lubricate as long as the rotor is turning.
u
Observe the oil pressure while performing post-lubrication: 0.5 < p
oil
≤
1.0.
u
Switch off post-lubrication as soon as the rotor is stationary or after no more than two
minutes.
Deviating procedures must be coordinated with ABB Turbo Systems.
Page
39
/
93