2CDC172114M0201
2
2019-09-06
V1.3
Read and understand this document
Please read and understand this document before using the products.
Please consult your ABB JOKAB SAFETY representative if you have any questions or comments.
LIMITATION OF LIABILITY
ABB JOKAB SAFETY DOES NOT ACCEPT ANY LIABILITY FOR ANY SPECIAL, DIRECT, OR CONSEQUENTIAL DAMAGES, LOSS
OF PROFIT OR ECONOMIC LOSSES RELATING TO THE PRODUCTS, EVEN WHEN SUCH CLAIMS ARE BASED ON A
CONTRACT, WARRANTY, NEGLIGENCE, OR LIABILITY.
The liability of ABB JOKAB SAFETY shall, under no circumstances, exceed the relevant purchase price for the product
that is the subject of the liability claim.
ABB JOKAB SAFETY CANNOT BE MADE RESPONSIBLE FOR CLAIMS REGARDING THE PRODUCT IF THE ANALYSIS
UNDERTAKEN BY ABB JOKAB SAFETY CONFIRMS THAT THE PRODUCTS WERE NOT PROPERLY HANDLED, STORED,
INSTALLED, OR MAINTAINED OR THAT IMPROPER USE, MISUSE, UNAUTHORIZED MODIFICATIONS, OR REPAIRS WERE
CARRIED OUT.
USABILITY EVALUATION
ABB JOKAB SAFETY does not accept any liability regarding compliance with standards, provisions, or regulations that
arise when the products are used in conjunction with the applications of the customer or that apply to use of the
product. If the customer requests, ABB/JOKAB shall provide applicable third-party certifications, giving rise to
benchmarks and application restrictions on use in relation to the use of the products. This information alone is not
enough to fully determine the suitability of the product when combined with the end product, the machine, the system,
or other applications.
Several examples of applications that require special attention are listed below. These examples are not intended to be
an exhaustive list of all the possible applications of the products and they should not be understood as meaning that
products are suitable for the potential uses specified:
Use outside, use where there is the possibility of chemical exposure or electrical interference, or use under conditions
not specified in this document.
Nuclear power control systems, incineration plants, railway installations, aviation systems, medical technology, gaming
machines, vehicles, and industrial plants are subject to special industry or official regulations.
Facilities, machines, and equipment that may pose a danger to life or property.
Please observe and follow all prohibitions on the use of the products.
NEVER USE THESE PRODUCTS IN APPLICATIONS THAT CAUSE A DANGER TO LIFE OR PROPERTY UNLESS THE SYSTEM
AS A WHOLE HAS BEEN INSURED AGAINST THESE DANGERS AND THE ABB JOKAB SAFETY PRODUCT HAS BEEN
PROPERLY DIMENSIONED AND INSTALLED IN RELATION TO THE SYSTEM AS A WHOLE.
PERFORMANCE DATA
Due to the fact that efforts have been made to ensure the accuracy of the information contained in this manual, ABB
JOKAB SAFETY assumes no responsibility for errors or omissions and reserves the right to make changes and
improvements without giving notice.
The performance data contained in this document is to provide the user with guidance when assessing usability and
does not constitute a warranty-related assurance. The data may relate to test results from ABB/JOKAB SAFETY. The
user must compare this with the actual situation in which the application is taking place. The current performance is
covered by the ABB JOKAB SAFETY warranty and limitations of liability.
