2CDC172114M0201
18
2019-09-06
V1.3
Additional buttons 1 to 4
The functionality of the additional buttons is user-defined and can be used, for example, for a start/stop
function for individual movements etc.
Signal LEDs
The controls for the LEDs can be controlled in a user-defined way via the AS-i Bus.
They usually signal when the process is approved and whether the enabling button is ready.
Home position detector
This function, in conjunction with the HD5-M-001 holder, provides information as to whether the enabling
device is in its holder.
Assist light
(flashlight)
This can be turned on in a way that is defined by the user, so that the work areas can light up for a short,
selected length of time.
Caution!
Please pay attention to the instructions in
section 3. “Functional description”
Vibration
One application of this function is when using the enabling device for setting up the machine/equipment,
to be made aware of processes that have been initiated but are not within the user’s direct line of sight and
therefore pose a hazard.
Caution!
Please pay attention to the instructions in
section 3. “Functional description”
