ABB FPTC-02, User Manual

Page: 10 / 96

WARNING!
General warning tells about conditions, other than those
caused by electricity, which can cause injury or death, or
damage to the equipment.
WARNING!
Electrostatic sensitive devices warning tells you about the risk
of electrostatic discharge which can cause damage to the
equipment.
ATEX-certified motor thermal protection functions
Only qualified specialists are permitted to install, control and maintain
the ATEX-certified motor thermal protection functions (see
EN/IEC 60079-14). Obey all safety regulations required with
application of Ex motors in Zone 1/21 (equipment category 2) or Zone
2/22 (equipment category 2 or 3).
WARNING!
Obey the safety instructions of the drive. If you ignore
them, injury or death, or damage to the equipment can
occur.
This manual does not contain the complete safety instructions of the
drive. It only includes the instructions related to the scope of this
manual. The general instructions are given in this section and the
option-specific instructions in the applicable chapter.
In addition to this manual:
• For ACS880 single drives, see the drive hardware manual
• For ACS880 air-cooled multidrives, multidrive modules and single
drive modules, see
ACS880 multidrive cabinets and modules
safety instructions (3AUA0000102301 [English])
10 Safety instructions
28