ABB FlexPendant, Product Manual

Page: 24 / 46

Connecting the retractable cable, IRC5
Use this procedure to connect the FlexPendant to the retractable cable.
Note Action
xx1400000782
Remove the small cover over the connectors
on the back of the FlexPendant. 1
Lift the strain relief from its guides to loosen
the cable. 2
xx1300002543
Push the tab fasteners and pull out the con-
nectors.
• Connector Black Dish
• RJ45 Connector
3
Push the connectors for the retractable cable
in place. 4
xx1300002544
Put the strain relief in the recess. 5
Put the housing cover in place. 6
Tighten the screws.
Continues on next page
24 Product manual - FlexPendant Retractable Cable
3HAC048816-001 Revision: B
© Copyright 2015-2016 ABB. All rights reserved.
2 Installation
2.3 Connecting the cables
Continued