ABB Feather Duster V2, Product Manual

Page: 86 / 192

4.4 Inspection activities
4.4.1 Inspecting feathers
General
The feathers wear normally. It is necessary to replace them every six months.
Feather care
Note
When replacing feathers, take care to ensure that the feathers are not damaged
or contaminated.
• Wash hands before installing feathers
• Keep grease and oil away from feathers
• Keep the feather roller in its package until it is ready for installation
• Reseal packages if they have been opened for inspection
• Do not put feathers on the floor directly. Always use the ABB-provided
feather roller support (Art. No:3HAX010000450 ) to support the feather roller.
Inspection, feathers
Visual inspection, no tools are required.
Other tools and procedures are specified in the replacement procedure .
xx1600000678
Feather in good condition A
Worn feather, to-be-replaced soon B
Destroyed feather, must be replaced C
86 Product manual - Feather Duster V2
3HAX010000210 Revision: A
© Copyright 2018 ABB. All rights reserved.
4 Maintenance
4.4.1 Inspecting feathers