CHARGING STATION
STATUS
Released
DOCUMENT ID.
TBA
REV.
A
LANG.
EN
PAGE
5/37
© Copyright 2019 ABB. All rights reserved.
1.2.
Purpose of the document
This document describes the configuration of the advanced features of EVLunic Pro M after it has been
installed. This includes, among other things, the description of the settings in the web interface.
This document is an extension to the supplied manuals of EVLunic Pro M.
You must comply with all instructions and safety instructions in the supplied manuals!
1.3.
Requirements
This document contains information for persons with the following requirements:
Target group
Required knowledge and abilities
Electrician
Person who, due to his or her special training, expertise and experience
as well as knowledge of current standards, is able to assess the work
performed and the possible hazards.
Knowledge of:
•
current valid safety information,
•
the mode of operation of the charging station,
•
the displays and operating elements of the charging station,
•
basics of network technology,
•
basics of IT,
•
diagnostic options,
•
systematic fault analysis and rectification,
•
the setting options on the charging station.
1.4.
Guarantee
Only the maintenance work expressly permitted by ABB may be performed. Any other manipulations to
the device will also result in loss of warranty.
WARNING!
Danger due to electric shock and fire hazard!
After opening the front part, product safety can no longer be guaranteed.
Only the covers described in the instructions may be opened. If one of the covers is sealed by a lead seal,
it is not permitted to be opened by unauthorized persons. If the lead seal is broken, the device loses its
specific suitability and may no longer be put into operation due to the resulting incorrect marking.