Manual Energy Storage Inverter ESI-S
The ESI-Manager user interface 129
−
click on the “Start” button
−
The ESI-Manager recognize automatically the probe address
−
Restart the same procedure for each probe
When one of the probes has a problem, it can be cleared by selecting that row and
clicking the “Clear” button. A unique address will be assigned to each activated probe
after the recognition completes. This unique address is a set of eight groups of numbers
like:
142 85 0 25 12 1 12 156
Note: In a multiple “Master” inverter situation, it is recommended that all the
temperature probes are connected to the ESI-Manager installed on the unit assigned
the “Master” status. In case of failure of Master unit, the next unit assumes the role of
Master, however, the temperature probe connection needs to be physically shifted to
the new Master unit and commissioning of probes be redone on the new ESI-Manager
for the probes to function properly.
7.9.4 The ‘Installation settings’ menu
WARNING: The installation settings menu is intended to be used by qualified
commissioning engineers that are authorized to change the inverter’s advanced
settings.
The inverter’s advanced settings include:
−
Setting up the ‘standby’ function
−
Setting up the ‘auto restart’ function
−
−
