17 - Quality
18 - Information Label
All Emax 2 Retrofill circuit breakers have been designed and manufactured to ANSI standards.
The design was based on the original requirements of the legacy switchgear and breakers.
The product is manufactured in ABB Inc USA, Senotobia, Missisipi (MS) and is inspected using
some of the same master gauges used on the legacy AK, AKR breakers to confirm electrical
and mechanical performance, including rejections
-
features.
On the front of each circuit breaker there is a factory-assembled label that details all electrical
accessories included on the circuit breaker.
19 - Product and Catalog Serial Numbers
Product catalog and serial numbers should be kept handy when communicating about the
circuit breaker. Each circuit breaker has a unique serial number (S/N) located on the front
fascia.
20 - Remove Circuit Breaker from Container
1. Inspect the shipping container for obvious signs of rough handling and/or external
damage incurred during transportation.
2. Record any observed damage for reporting to the carrier. Ensure all recorded reports and
claims include the order number and name plate information.
3. Remove the banding straps and lift the top cover.
4. Remove all packaging material.
5. Remove all product documentation and store properly.
6. Unscrew the mounting screws that fasten the circuit breaker to the bottom of the
shipping pallet and remove the circuit breaker.
7. Remove the two shipping brackets and discard them.
1. Use a lifting device for moving circuit breaker in order to avoid personal injury and
damaging the breaker.
2. Use a proper overhead lifting device to mount breaker into the switchgear.
Contact Email:
, Phone: 888-385-1221 for availability of a
hoisting device.
LiftingBar for AKD5/6/8/10/OEM, Emax2 Retrofit kits ratings upto 2000A (Except 1600A):
2TSE431929R1000
LiftingBar AKD5/6/8/10 OEM, 1600A, 3000A-4000A :
2TSE431931R1000
Inspect and
Prepare
Use Lifting Device
18 ©2022 Emax 2 Retrofill Circuit Breakers 800A-4000A
2TSA451014P0000 Rev-B
