ABB EBS852, Operating Instruction

Page: 37 / 42

Technical data
42/68-831-EN EBS852, EBS862 (Contrac) 37
Pos: 20.7 /Überschriften/1.1/1-spaltig/S - U/Technische Daten EBS862 @ 20\mod_1209030681359_3101.doc @ 182359
10.3 Technical data for the EBS862
Pos: 20.8 /Technische Daten / Datenblatt/Aktorik/Antriebe/Leistungselektroniken/Leistungselektronik EBS862 (Contrac)/Technische Daten (Ex) @ 7\mod_1171878098843_3101.doc @ 68203
Supply voltage (standard actuators) 230 V AC (190 … 260 V); 47.5 … 63 Hz; 1 Ph
Supply voltage
(Ex actuators) 230 V AC (190 … 253 V); 47.5 … 63 Hz; 1 Ph
l
max.
.at 230 V
RHD(E)2500-10 5.3 A
RHD(E)4000-10 10.0 A
RHD8000-12 8.0 A
RHDE8000-15 8.0 A
RHD(E)16000-30 12.5 A
RSD(E)50-10.0 6.4 A
RSD100-10.0 12.5 A
Current at electronic unit [A] (AC 230
V AC)
RSD200-5.0 13.0 A
l
pos.
(230 V)
approx. 40 … 50% of l
max.
External fuse safety fuse 35 A (Lindner) + thermal circuit breaker 16 A (ETA)
(fuse and circuit breaker are part of shipment)
External fuse for heat supply 2 ... 6 A; medium time-lag
Analog input 0 / 4 … 20 mA
Analog output 0 / 4 … 20 mA, galvanically isolated
3 binary inputs
BE 1 … BE 3 (DI 1 … DI 3) Binary 0: -3 … 5 V or open, galvanically separated
Binary 1: 12 … 35 V, galvanically separated
3 binary outputs
BA 1 ... BA 3 (DO 1 … DO 3) Potential free relay contact,
max. 60 V, 150 mA
Digital communication
RS232 for commissioning and service, optionally FSK / HART
®
Default settings Behavior in 0 / 100 % end position:
set point function:
set point input:
function selection:
actual value:
digital input:
digital output:
positioning time-out Hold with rated torque / end positions
linear, set point = position value
4 … 20 mA
positioner, parameter: setpoint
4 … 20 mA
BE 1 (DI 1) M / A selection;
BE 2 / 3 (DI 2 / 3) manual interv/ -
BA 1 (DO 1) ready for operation;
BA 2 / 3 (DO 2 / 3) end position signal 0 / 100 %
not activated for standard actuators
always activated for actuators in explosion proof design
Voltage output U
V
24 V, 15 mA, galvanically isolated; e.g., for scanning external contacts
Transmitter (optional) Supply for 2-wire transmitter with activated process controller in Contrac
Individual settings See data sheet 10/68-2.40 or upon request
Pos: 21 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830