manualshive.com logo in svg

ABB COM600 series 5.0, Technical Reference Manual

Share
Download
ABB COM600 series 5.0 Technical Reference Manual Download Page 79

SetFile

The SetFile service initiates the remote device to obtain a file from the local file storage
to the remote file storage. The service triggers an IEC 61850 device to call the IEC 61850
clients GetFile service and during this, the IEC 61850 client acts as a file server. During
this operation, the Status, Received bytes and File size in bytes attributes are updated as
the file is moved (in max MMS message size parts). The local file parameters identify
the local file and the copied file is placed to the remote file storage according to remote
file parameters.

Remote file name

Remote file directory

Local file name

Local file directory

Required parameters:

5

Control code:

1500

1520

1540

1560

Service status codes:

94xx

Failure status codes:

Remote file dir Remote file name

The remote file name:

Local file dir Local file name

The local file name:

DeleteFile

You can delete a file from the remote file storage with the DeleteFile service.

Remote file name

Remote file directory

Required parameters:

6

Control code:

1600

Service status codes:

96xx

Failure status codes:

Remote file dir Remote file name

The remote file name:

Cancel

You can cancel the current service with the Cancel service. The Cancel service sets the
status to Ready and clears for the following attribute values: File size in bytes, Received
bytes and Status.

79

COM600 series 5.0

1MRS758690

Master Protocols (Ethernet) and Applications Technical Refer-
ence Manual

Summary of Contents for COM600 series 5.0





































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands