manualshive.com logo in svg

ABB COM600 3.4, User Manual

Share
Download
ABB COM600 3.4 User Manual Download Page 69

Appendix 1

Interoperability list for IEC101 OPC Client

Not supported

Supported

Supported, may need additional configuring

Application layer telegram formats

Interoperability

This companion standard presents sets of parameters and alternatives from which subsets
have to be selected to implement particular telecontrol systems. Certain parameter values,
such as the number of octets in the common address of ASDUs represent mutually
exclusive alternatives. This means that only one value of the defined parameters is
admitted per system. Other parameters, such as the listed set of different process
information in command and in monitor direction allow the specification of the complete
set or subsets, as appropriate for the applications. This clause summarizes the parameters
of the previous clauses to facilitate a suitable selection for a specific application. If a
system is composed of equipment stemming from different manufacturers, it is necessary
that all the partners agree on the selected parameters.

The selected parameters must be marked in the white boxes.

The full specification of a system requires individual selection
of certain parameters for certain parts of the system, for
example, the individual selection of scaling factors for indi-
vidually addressable measured values

Network configuration (network-specific parameter)

Multi-point-party line

Point-to-point

Multi-point-star

Multiple point to point

Redundant lines

The use of redundant lines requires specific functionality from
the master. Contact your local supplier for more details.

69

Station Automation COM600 3.4

1MRS755382

IEC 60870-5-101 Slave (OPC) User's Manual

Summary of Contents for COM600 3.4



















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands