ABB COM600 3.4 User Manual Download | Manualshive

Page: 54 / 82

background image

You can take an IEC101Channel into use by marking the In use check box. If you unmark
the check box, the channel is taken out of use. To manually update diagnostic counters,
click Refresh.

IEC101 Device diagnostics

4.5.

The IEC101 Device communication can be monitored with the Online diagnostics
function. You can also take a device into use or out of use as described in this section.

To monitor and control IEC101 Device communication:
1.

Select the device you want to monitor in the object tree of SAB600.

2.

Right-click the device.

3.

Select Online diagnostics.

In the Status information field, you can monitor the device status.

The Diagnostic counters field provides information on device activity. To reset diagnostic
counters, click Reset counters.

You can take an IEC101 Device into use by marking the In use check box. If you unmark
the check box, the device is taken out of use. To manually update diagnostic counters,
click Refresh.

Signal diagnostics

4.6.

The IEC101 Slave OPC client has a diagnostic function which makes it possible to
monitor the flow of process data changes and commands. The diagnostic function is
activated by marking the Diagnostic Events Enabled check box, located in the Online
diagnostics function of the IEC101 Device. When the diagnostic function is activated,
the IEC101 OPC Client Alarm & Event server generates events with information about
data changes and commands.

To view the event list:
1.

Select the IEC101 Slave OPC Client object in the object tree of SAB600.

2.

Right-click the IEC101 Slave OPC Client.

3.

Select Diagnostic AE client (see Figure 4.6-1)

54

1MRS755382

Station Automation COM600 3.4

IEC 60870-5-101 Slave (OPC) User's Manual

«
...
52
53
54
55
56
...
»

Summary of Contents for COM600 3.4



















































































Reviews:

No comments

Related manuals for COM600 3.4

Brand: Barracuda Networks Pages: 2

Brand: Yamaha Pages: 4

PG-FLEX RT FRL-752

Brand: PairGain Pages: 6

kontron COMe-cEL6

Brand: S&T Pages: 99

Brand: OpenVox Pages: 13

DIRECTOR PRO series

Brand: MF DIGITAL Pages: 79

Aquaduct 360 XT

Brand: Aqua Computer Pages: 28

ELC-LTTR240-TBP

Brand: ENERMAX Pages: 16

Brand: Cisco MERAKI Pages: 4

BLKDP45SG - MB 1333FSB DDR3 1333 Aud+Lan RAID SATA ATX

Brand: Intel Pages: 86

Brand: Rainbow Pages: 2

Brand: Intercoax Pages: 2

Brand: Comway Pages: 20

Brand: Baikal Miner Pages: 14

Brand: LaView Pages: 2

Brand: WTI Pages: 178

7798 I/SITE LAN

Brand: CSI Pages: 56

Brand: IEI Technology Pages: 146

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands