Description
Value or Value range/ Default
Property/ Para-
meter
Specifies the format of timestamp if one
is used: none, short, or long. Long time
tag format cannot be used with a scaled
value.
Do not Send Time Tag = 0
Send Short Format Time Tag
= 1
Send Long Format Time Tag =
2
Default: Send Long Format
Time Tag
Time Tag Handling
WYE
3.4.5.10.
Table 3.4.5.10-1 Configurable WYE properties for OPC client
Description
Value or Value range/ Default
Property/ Para-
meter
Basic
Common data class according to IEC
61850.
WYE
Common Data
Class
Addresses
IEC address for neutral.
0...16777215
0 = Not in use
Neutral Address
IEC address for phase A.
0...16777215
0 = Not in use
Phase A Address
IEC address for phase B.
0...16777215
0 = Not in use
Phase B Address
IEC address for phase C.
0...16777215
0 = Not in use
Phase C Address
IED address for net.
0...16777215
0 = Not in use
Net Address
IED address for res.
0...16777215
0 = Not in use
Res Address
Common
Class of ASDU. Data sent from the slave
to the master can be assigned to two
classes: class 1 and class 2. Data in class
1 is sent with higher priority than data in
class 2.
Class 1 = 1
Class 2 = 2
Default: Class 2 = 2
Class
42
1MRS755382
Station Automation COM600 3.4
IEC 60870-5-101 Slave (OPC) User's Manual
Summary of Contents for COM600 3.4
