ABB COM600 3.4, User Manual

Page: 17 / 82

Adding IEC101 Slave OPC Client 3.3.2.
To add the OPC client object:
1. Add the IEC101 Slave OPC Client object in the Communication structure by
selecting the Gateway object.
2. Right-click the Gateway object and select New > IEC101 > IEC101 Slave OPC
Client.
Adding Channel objects 3.3.3.
After the IEC101 Slave OPC Client object has been successfully added, you can continue
building the object tree by adding either the IEC101 Balanced Channel object or the
IEC101 Unbalanced Channel object.
To add IEC101 Channel object:
1.
Select an IEC101 Slave OPC Client object and right-click it.
2. Add an IEC101 Balanced Channel object or an IEC101 Unbalanced Channel object.
3. Rename the new object. The names of the IEC101 Channels have to be unique.
Adding Device objects 3.3.4.
After a channel object has been successfully added, you can continue building the
structure by adding the IEC101 Device object. All the data can be connected to one
device or divided to several slave devices. Before dividing data to several slave devices,
it must be checked that the current protocol mode and the master system support the
feature.
To add IEC101 Device object:
1.
Select a Channel object.
2. Add an IEC101 Device object.
3. Rename the new object. The names within an IEC101 Channel have to be unique.
Adding data objects using Cross-References function 3.3.5.
Data objects are added somewhat differently than the upper level objects. Basically, you
drag and drop the data objects you need from an OPC server to the IEC101 Slave OPC
Client.
To add data objects:
1.
Select an IEC101 Device object (IEC101 IED) and right-click it.
2. Select Cross-References. The Cross References function appears (Figure 3.3.5-1).
3. In the Project Explorer, select now a logical node within an OPC server, from which
you want to connect the data objects to IEC101 Slave OPC Client.
17
Station Automation COM600 3.4
1MRS755382
IEC 60870-5-101 Slave (OPC) User's Manual