1. Display the first parameter accessible at the main operator
level:
Remarks
At the main operator level, only those parameters are accessi-
ble, which were defined in parameter
(see page 9). The fac-
tory setting for
is 0, i.e. no additional parameters can be se-
lected at the main operator level.
If parameter
has the value 1, parameters can only be dis-
played but not changed (see page 9).
2. Change parameter:
,
3. Display the next parameter:
4. Change the parameter:
,
etc. until
5. Last parameter is displayed:
6. Change parameter:
,
7. Access the first menu level:
for at least 6 s
8. Change parameter:
,
9. Display the next parameter:
etc. up to the last parameter of the first menu level
.
10. Either return to the main operator level:
or
proceed further to the second menu level:
for at least 6 s
11. Change parameter:
,
12. Display the next parameter:
13. Change parameter:
,
etc. up to the last parameter of the second menu level
.
14. Either return to the main operator level:
or
proceed further to the third menu level:
for at least 6 s
15. Calibrate controller: see section on “Calibration”
or
return to the main operator level:
Remarks
The complete parameter-definition, the parameters and their
adjustment possibilities as well as their factory settings are listed
on pages 8 to 11.
With
it is possible to return to the main operator level at any
time.
Modified parameters become immediately effective.
Parameter definition
7
