ABB B&R FT50, User Manual

Page: 77 / 130

Configuration
Power Panel FT50 User's manual V1.19 77
7.1.1.12 Service page
Security
Startup
Network
Time
Screen
Audio
Gesture
VNC
Web
Storage
Update
Backup & Reset
Security
OPC UA
Save & Exit
Service password
Password for setup changes
Max. 100 characters
●●●●●●●●
Show password
Encrypt password
Save security password in encrypted form
Allow untrusted images
Enable installation of unsigned images (volatile setting)!
Service password
Default setting: EMPTY (no password entered)
Input range: Max. 100 characters
The service password is used to secure access to the service pages (see
"Entering the service password" on
page 53 ).
The password is stored on the device in configuration file PFT50Config.xml .
Show password
Default setting: Disabled
Enabled The password is displayed in the input field as plain text.
Disabled The password is hidden in the input field by placeholder characters (●●●●●●).
Encrypt password
Default setting: Disabled
Enabled
The password is stored on the device in encrypted form.
Disabled The password is stored on the device as plain text.
Allow untrusted images
Default setting: Disabled
Disabled Only signed images can be installed on the device.
Enabled If this option is enabled, an unsigned image can be installed (see service page "Update" on page
72 ).
This option is not saved in the system settings and immediately disabled after exiting the service
pages.
This function is necessary to install a system backup created earlier on the device, for example (backups are
generally saved without a signature).