ABB B&R FT50, User Manual

Page: 126 / 130

Accessories
126 Power Panel FT50 User's manual V1.19
Model number 5CASD3.
0030-00
5CASD3.
0050-00
5CASD3.
0100-00
5CASD3.
0150-00
5CASD3.
0200-00
5CASD3.
0300-00
5CASD3.
0500-00
5CASD3.
1000-00
General information
Certifications
CE Yes
UL cULus E115267
Industrial control equipment
HazLoc cULus HazLoc E180196
Industrial control equipment
for hazardous locations
Class I, Division 2, Groups ABCD, T4
1)
EAC Yes
Cable construction
Wire cross section 4x 2x 26/7 AWG 4x 2x 23/1 AWG
Properties Flame-retardant, halogen-free, lead-free
Outer jacket
Material Polyurethane (PUR)
Color Yellow, RAL 1021
Labeling HARTING INDUSTRIAL CABLE S/FTP CAT 6A PUR 4x2xAWG26/7 HARTING INDUSTRIAL INSTALLATION
CABLE S/FTP CAT 7 PUR 4x2xAWG23/1
Lines
Wire insulation Polyethylene (PE)
Wire colors Green/White-green, orange/white-orange, blue/white-blue, brown/white-brown
Shield Aluminum foil and braided wire shield composed of tinned copper wires
Type Bare copper strand, 4x 2x 26/7 AWG Bare copper strand, 4x 2x 23/1 AWG
Connector
Type 2x RJ45, male
Mating cycles Min. 750
Contacts 8
Electrical properties
2)
Operating voltage ≤100 V ≤125 V
Conductor resistance ≤290 Ω/km ≤75 Ω/km
Wave impedance 100 ±5 Ω (at 100 MHz)
Transfer properties Category 6A / Class EA up to 500 MHz per ISO/IEC
11801 (EN 50173-1), ISO/IEC 24702 (EN 50173-3)
Category 7 / Class F up to 600 MHz
per ISO/IEC 11801 (EN 50173-1),
ISO/IEC 24702 (EN 50173-3)
Insulation resistance ≥500 MΩ/km ≥5 GΩ/km
Operating conditions
Pollution degree per EN 61131-2 Pollution degree 2
Flame-retardant IEC 60332-1-2
Oil and hydrolysis resistance EN 60811-2-1 (90°C / 7x24 h)
Degree of protection per EN 60529
Cables IP20
RJ45 connector IP20, only when properly connected
Ambient conditions
Temperature
Storage -40 to 70°C
Fixed installation -40 to 70°C
Flexible installation -40 to 70°C -10 to 50°C
Mechanical properties
Dimensions
Length 3 m 5 m 10 m 15 m 20 m 30 m 50 m 100 m
Diameter 6.7 mm 8.3 mm
Bend radius
Fixed installation ≥5x diameter ≥4x diameter
Flexible installation ≥10x diameter ≥8x diameter
Weight 250 g 500 g 700 g 950 g 2150 g 3500 g 6950 g
Tension
In operation ≤70 N ≤110 N
During installation ≤70 N ≤110 N
Table 20: 5CASD3.0030-00, 5CASD3.0050-00, 5CASD3.0100-00, 5CASD3.0150-00,
5CASD3.0200-00, 5CASD3.0300-00, 5CASD3.0500-00, 5CASD3.1000-00 - Technical data
1) Yes, but applies only if all components installed in the complete system have this certification and the complete system bears the corresponding mark.
2) At 20°C ambient temperature.