manualshive.com logo in svg

ABB Arc Guard System TVOC-2, Installation And Maintenance Manual

Share
Download
ABB Arc Guard System TVOC-2 Installation And Maintenance Manual Download Page 73

Human Machine Interface, functions

71

4 Language

If you understand the current menu language, follow the steps to set the 
language of the system menu:

In the Main menu:

1

Select 4 Language, press OK.

2

Select the language to use, press OK.

Confirm with Yes.

Note!

If you do not understand the menu language, use factory reset.

5 Set Time and 
Date

Use this procedure to set the time and date in the system.

In the Set Time menu do the steps below: 

1

Scroll to correct hour, press OK.

2

Scroll to correct minutes, press OK.

3

Scroll to correct day, press OK.

4

Scroll to correct month, press OK.

5

Scroll to correct year, press OK to return to Start window.

Factory reset

Making the factory reset will force the HMI to start the Start-Up sequence.

Press and hold the 2 soft keys in the middle for more then 10 s.

This will force the HMI to start the Start-Up sequence.

Arc Guard System TVOC-2

Power

Error

Trip

Summary of Contents for Arc Guard System TVOC-2



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands