22
ABB i-bus
®
EIB / KNX
Commissioning
3.2.3
Parameter window
“Channel A – Floating
contact interrogation”
Fig. 15: Parameter window “Channel A – Floating contact interrogation”
Use channel
Options:
no/yes
This parameter determines the use of channel A.
Sensor output
Options:
0 – 1 V/0 – 5 V/0 – 10 V/1 – 10 V
0 – 20 mA/4 – 20 mA/0 – 1000 ohm/
Floating contact interrogation /
PT100 2-conductor technology – 30...+ 70 °C/
PT100 2-conductor technology – 200...+ 800 °C
This parameter is used to set the
Sensor output
.
The data can be found in the technical documentation of the sensor
manufacturer.
Note:
The minimum pulse width is 100 ms.
Signal ON upon contact
Options:
closed/open
This parameter is used to set the contact setting during the ON signal.
Option
closed
= Contact closed during ON signal
Option
open
= Contact open during ON signal
Output value is sent as
This parameter is fixed as 1 bit.
Bit value “0” = OFF signal
Bit value “1” = ON signal
