18
ABB i-bus
®
EIB / KNX
The following section describes the parameters for threshold 1. These also
apply to threshold 2.
Fig. 13: Parameter window “Channel A – Threshold 1”
Use threshold value
Options: no/yes
This parameter is used to define whether
Threshold 1
should be used.
If
yes
is selected, the “Threshold value – Channel A Threshold 1”
communication object appears.
Tolerance band lower limit
Tolerance band upper limit
Options:
Dependent on the “Send value as” parameter in the
“Channel A” parameter window
These two parameters are used to set the upper and lower limit.
Note:
Different limits are predefined, depending on the setting
for the “Send value as” parameter in the “Channel A”
parameter window.
Commissioning
3.2.2.3 Parameter window
“A – Threshold 1”
